[14] Xiaohu Deng, Liwen Zhang, Chongxiang Yue. Influences of hot working parameters on dynamic recrystallisation of GCr15 bearing steel. Materials Research Innovations. 2009, 13(4), 436-440. [15] 邓小虎,张立文. CA/MC法模拟焊缝凝固微观组织的形成.大连理工大学学报. 2011, 51(1), 36-40. [16] 邓小虎,张立文,何燕,裴继斌,卢愈. 应变速率对金属动态再结晶影响的数值模拟. 塑性工程学报.2007,14(2):24-29. [17] Xiaohu Deng, Liwen Zhang, Jibin Pei, Delun Guo. A 2-D cellular automaton modeling of GTAW solidification microstructure. Proceedings of the 7th Pacific Rim International Conference on Modeling of Casting and Solidification Processes,Dalian,2007, 303-310. [18] Ming Chen, Xiao-Dong Hu, Bing Han, Xiao-Hu Deng, Dong-Ying Ju. Study on the microstructural evolution of AZ31 magnesium alloy in a vertical twin-roll casting process. Applied Physics A-Materials Science & Processing, 2016, 122(2):1-10 [19] 张伟,曲周德,邓小虎. 钢的热处理数值模拟研究进展, 天津职业技术师范大学学报, 2014, (03):27-31. [20] Zhang Wei, Qu Zhoude, Deng Xiaohu, Duan Xing-wang. Numerical simulation of Cr12MoV steel during quenching process. Adanced Materials Research. 2014, 989-994:751-754. [21] Dongying Ju,Xiaohu Deng. Modeling and simulation of iron-carbon phase transformation during tempering of steel. Rare Metal Materials and Engineering. 2012. 41(S1):06-12. [22] Xing Liu, Ryuji Mukai, Xiaohu Deng and Dongying Ju. Computer simulation of heat treatment process for support plate of nuclear reactor. Advanced Materials Research. 2011, vols. 314-316:380-383. [23] Dongying Ju, Xinmao Fu, Shun Na, Bing Han and Xiaohu Deng. Modification of microstructure and residual stress on friction welding surface of titanium alloy by water-jet cavitation peening. Advanced Materials Research. 2011, vols. 317-319:429-435. [24] 卢瑜,张立文,邓小虎,裴继斌,王赛,张国梁. 纯镍动态再结晶过程的元胞自动机模拟 塑性工程学报. 2008,15(2):70-75 [25] 张立文,卢瑜,邓小虎,裴继斌,张国梁. 不同形核机制下对动态再结晶过程模拟研究. 大连理工大学学报. 2008, 48(3): 351-355 [26] 卢瑜,张立文,邓小虎,裴继斌,王赛,张国梁. 纯铜动态再结晶过程的元胞自动机模拟. 金属学报. 2008, 44(3):292-296 [27] 卢瑜,张立文,邓小虎,裴继斌,王赛,张国梁.变形温度对纯铜动态再结晶影响的CA法模拟研究. 钢铁研究学报. 2007, 19: 128-132 |